Users Guide
Sign-in Access
Sign-in Access lets you enroll, modify, and check enrollment status, based on policy set by the administrator.
After initial enrollment, you can click the Sign-in Access tile to add or modify credentials.
NOTE: The Sign-in Access tile will display only if the PBA is active.
Enroll Credentials for the First Time
To enroll credentials for the first time:
1. On the Data Security Console home page, click the Sign-In Access tile.
2. On the Password page, to change your Windows password, enter the current password then enter and confirm a new
password and click Change.
3. On the Recovery Question page, select and provide answers to three Recovery Questions then click Enroll.
For more detailed information about enrolling a credential, or to change a credential, see Add, Modify, or View Enrollments.
Add, Modify, or View Enrollments
To add, modify, or view enrollments, click the Sign-In Access tile.
Tabs in the left pane list available Enrollments. This varies based on your platform or type of hardware.
The Sign-in Access page displays supported credentials, their policy setting (Required or N/A), and their enrollment status.
From this page, users can manage their enrollments, based on policy set by the administrator:
● To enroll a credential for the first time, on the line with the credential, click Enroll.
● To delete an existing enrolled credential, click Delete.
● If policy does not allow you to either enroll or modify your own credentials, the Enroll and Delete links on the Status page
are inactive.
● To change an existing enrollment, click the appropriate tab in the left pane.
If policy does not allow enrollment or modification of a credential, a message displays on the credential's enrollment page,
"Credentials modification is not allowed by policy."
5
Sign-in Access 13