Install Guide
Constant/Value Description
FVE_E_PIN_INVALID
0x80310043
The BitLocker encryption key cannot be obtained from the
TPM and PIN.
FVE_E_AUTH_INVALID_APPLICATION
0x80310044
A boot application has changed since BitLocker Drive
Encryption was enabled.
FVE_E_AUTH_INVALID_CONFIG
0x80310045
The Boot Configuration Data (BCD) settings have changed
since BitLocker Drive Encryption was enabled.
FVE_E_FIPS_DISABLE_PROTECTION_NOT_ALLOWED
0x80310046
The Group Policy setting requiring FIPS compliance prohibits
the use of unencrypted keys, which prevents BitLocker from
being suspended on this drive. Please contact your domain
administrator for more information.
FVE_E_FS_NOT_EXTENDED
0x80310047
This drive cannot be encrypted by BitLocker Drive
Encryption because the file system does not extend to the
end of the drive. Repartition this drive and then try again.
FVE_E_FIRMWARE_TYPE_NOT_SUPPORTED
0x80310048
BitLocker Drive Encryption cannot be enabled on the
operating system drive. Contact the computer manufacturer
for BIOS upgrade instructions.
FVE_E_NO_LICENSE
0x80310049
This version of Windows does not include BitLocker Drive
Encryption. To use BitLocker Drive Encryption, please
upgrade the operating system.
FVE_E_NOT_ON_STACK
0x8031004A
BitLocker Drive Encryption cannot be used because critical
BitLocker system files are missing or corrupted. Use
Windows Startup Repair to restore these files to your
computer.
FVE_E_FS_MOUNTED
0x8031004B
The drive cannot be locked when the drive is in use.
FVE_E_TOKEN_NOT_IMPERSONATED
0x8031004C
The access token associated with the current thread is not
an impersonated token.
FVE_E_DRY_RUN_FAILED
0x8031004D
The BitLocker encryption key cannot be obtained. Verify
that the TPM is enabled and ownership has been taken. If
this computer does not have a TPM, verify that the USB
drive is inserted and available.
FVE_E_REBOOT_REQUIRED
0x8031004E
You must restart your computer before continuing with
BitLocker Drive Encryption.
FVE_E_DEBUGGER_ENABLED
0x8031004F
Drive encryption cannot occur while boot debugging is
enabled. Use the bcdedit command-line tool to turn off boot
debugging.
FVE_E_RAW_ACCESS
0x80310050
No action was taken as BitLocker Drive Encryption is in raw
access mode.
FVE_E_RAW_BLOCKED
0x80310051
BitLocker Drive Encryption cannot enter raw access mode
for this drive because the drive is currently in use.
150 Troubleshooting