Deployment Guide

- api-sae1.cylance.com
- protect-api-sae1.cylance.com
- download-sae1.cylance.com
￭ Europe
- login-euc1.cylance.com
- protect-euc1.cylance.com
- data-euc1.cylance.com
- update-euc1.cylance.com
- api-euc1.cylance.com
- protect-api-euc1.cylance.com
- download-euc1.cylance.com
￭ Middle East and Asia
- login-au.cylance.com
- protect-au.cylance.com
- data-au.cylance.com
- update-au.cylance.com
- api-au.cylance.com
- protect-api-au.cylance.com
- download-au.cylance.com
￭ Japan, Australia, and New Zealand
- login-apne1.cylance.com
- protect-apne1.cylance.com
- data-apne1.cylance.com
- update-apne1.cylance.com
- api-apne1.cylance.com
- protect-api-apne1.cylance.com
- download-apne1.cylance.com
○ Port
￭ 443
○ Outbound Device
￭ All managed endpoints
○ Outbound Service
￭ CylanceSVC
○ Originating Port
￭ 443
Public Communication to Front-End Server (if needed)
This sees information traveling from the Internet to the Front-End server. Firewall or routing configuration must have ports set
as inbound from a public or Internet connection to one or more Front-End servers or a load balancer.
● Dell Core Server Proxy: HTTPS/8888
● Dell Device Server: HTTPS/8081
● Dell Policy Proxy: TCP/8000
● Dell Security Server: HTTPS/8443
DMZ or Front-End Communication to Back-End Server (if needed)
The below services and ports communicate from any Security Management Server that is configured in Front-End mode to the
Security Management Server configured in Back-End mode. Firewall or routing configuration must have ports set as inbound
from one or more Front-End servers or load balancers to the Back-End server.
● Front-End Dell Policy Proxy and Dell Beacon Server to Back-End Dell Message Broker: STOMP/61613
● Front-End Dell Security Server Proxy to Back-End Dell Security Server: HTTPS/8443
● Front-End Dell Core Server Proxy to Back-End Dell Core Server: HTTPS/8888
● Front-End Dell Device Server to Back-End Dell Security Server: HTTPS/8443
Back-End Server to Internal Network
14
Pre-Installation Configuration