Administrator Guide

<key>NoAuthenticateUsers</key> [In this sample code, users from a specific domain
name can log in without being prompted to activate against the Dell Server.]
<dict>
<key>dsAttrTypeStandard:AuthenticationAuthority</key>
<array>
<string>;Kerberosv5;;*@domainName.com;domainName.com*</string>
</array>
</dict>
<key>NoAuthenticateUsers</key> [In this sample code, specific users can log in
without being prompted to authenticate against the Dell Server.]
<dict>
<key>dsAttrTypeStandard:AuthenticationAuthority</key>
<array>
<string>;Kerberosv5;;[e-mail];domainName.com*</string>
<string>;Kerberosv5;;[e-mail];domainName.com*</string>
</array>
</dict>
<key>AllowedOSVersions</key> [AllowedOSVersions is not present in the
default .plist file, it must be added to the file. Add from <key> through </
array> to allow a newer version of operating system to be used. See Note above.]
<array>
<string>10.<x.x></string> [Operating system version]
</array>
<key>UseRecoveryKey</key>
<false/> [This value is obsolete since current versions can use both personal and
institutional recovery keys for FileVault encryption.]
<key>SecurityServers</key>
<array>
<dict>
<key>Host</key>
<string>securityserver.organization.com</string> [Replace this value with your
Security Server URL]
<key>Port</key>
<integer>8443</integer> [Beginning in v8.0, the default port number is 8443.
However, port number 8081 will still allow activations. In general, if your Dell
Server is v8.0 or later, use port 8443. If your Dell Server is pre-v8.0, use port
8081.]
<key>UseSSL</key>
<true/> [Dell recommends a true value]
</dict>
</array>
<key>ReuseUniqueIdentifier</key>
<false/> [When this value is set to true, the computer identifies itself to the
Dell Server by the same hostname it was activated with, regardless of changes to the
computer hostname.]
<key>Domains</key>
<array>
<dict>
<key>DisplayName</key>
<string>COMPANY</string>
<key>Domain</key>
<string>department.organization.com</string> [Replace this value with the
Domain URL that users will activate against]
</dict>
</array>
<key>PolicyProxies</key>
<array>
<dict>
<key>Host</key>
<string>policyproxy.organization.com</string> [Replace this value with your
Policy Proxy URL]
<key>Port</key>
<integer>8000</integer> [Leave as-is unless there is a conflict with an
existing port]
</dict>
</array>
<key>Version</key>
<integer>2</integer> [Do not modify]
<key>MaxPasswordDelay</key>
<integer>xxxx</integer> [Number of seconds to apply to the security policy,
"Require password XXXX after sleep or screen saver begins." The acceptable range is
0-32400.]
<key>EMSTreatsUnsupportedFileSystemAs</key>
Tasks for the Encryption Client
11