Deployment Guide
Table Of Contents
- Dell Encryption Personal Installation Guide v11.0
- Contents
- Overview
- Requirements
- Download the Software
- Installation
- Advanced Authentication and Encryption Personal Setup Wizards
- Configure Console Settings
- Uninstall the Master Installer
- Uninstall Using the Child Installers
- Data Security Uninstaller
- Policies and Template Descriptions
- Policies
- Template Descriptions
- Aggressive Protection for All Fixed Drives and External Drives
- PCI Regulation Targeted
- Data Breach Regulation Targeted
- HIPAA Regulation Targeted
- Basic Protection for All Fixed Drives and External Drives (Default)
- Basic Protection for All Fixed Drives
- Basic Protection for System Drive Only
- Basic Protection for External Drives
- Encryption Disabled
- Extract Child Installers
- Troubleshooting
- Glossary
Extract Child Installers
● To install each client individually, extract the child executable files from the installer.
● If the master installer has been used to install, the clients must be uninstalled individually. Use this process to extract the
clients from the master installer so that they can be used for uninstallation.
1. From the Dell installation media, copy the DDSSetup.exe file to the local computer.
2. Open a command prompt in the same location as the DDSSetup.exe file and enter:
DDSSetup.exe /s /z"\"EXTRACT_INSTALLERS=C:\Extracted""
The extraction path cannot exceed 63 characters.
Before you begin installation, ensure that all prerequisites have been met and all required software has been installed for
each child installer that you plan to install. Refer to Requirements for details.
The extracted child installers are located at C:\extracted\.
Proceed to Troubleshooting.
11
Extract Child Installers 65