Administrator Guide

The <machinename_domain.com>.exe file is downloaded.
Perform a Recovery
1. Create bootable media of the recovery environment. For instructions, see Appendix A - Burning the Recovery Environment.
NOTE: Disable SecureBoot before the recovery process. When finished, enable SecureBoot.
2. Boot to that media on a recovery system or on the device with the drive you are attempting to recover.
A WinPE Environment opens.
3. Enter x and press Enter to get to a command prompt.
4. Navigate to the recovery file and launch it.
An Encryption client diagnostic dialog opens and the recovery file is being generated in the background.
48
General Purpose Key Recovery