Deployment Guide

Configuration Guide 19
4
Configure the Security Server
This chapter details the parameters that may be changed to tune the Security Server to your environment.
Only change documented parameters in these files. Changing other
data in these files, including tags, can cause system
corruption and failure. Dell cannot guarantee that problems resulting from unauthorized changes to these files can be
solved without re-installing the Security Server.
context.properties
You may change the following parameters in <Security Server install dir>\webapps\xapi\WEB-INF\context.properties.
We recommend that you track your changes in comments at the beginning of the
file. This will allow you to easily transfer
your changes to the new file when you upgrade.
context.properties
Parameter Default Description
default.gatekeeper.group.remote CMGREMOTE Device remote group name. Do
not modify.
xmlrpc.max.threads 250 Max number of concurrent threads within
this Device Server.
default.auth.upn.suffix UPN suffix that is appended to a user login
name if the server requires a fully qualified
login name and one is not provided in the
request.
device.manual.auth.enable true Indicates whether manual authentications
are enabled or disabled. Do not modify
service.activation.enable true Indicates whether activations are handled
by the Device Server. Do not modify
service.policy.enable true Indicates whether policy is enabled or
disabl
ed. Do not modify.
service.auth.enable true Indicates whether authentications are
handled by the Device Server.
service.forensic.enable true This setting is used with a forensic
integration plug-in. Contact Dell Support if
forensic tool integration is needed.
service.support.enable true Enables retrieval of meta information about
the server
.
service.device.enable true Enables support of Shield services such as
SDE keys storage.