Reference Guide

Security Management Server Virtual v10.2.10 AdminHelp
103
Specifies the severity of the messages that should display in the Syslog server. This is subjective, and it
may be set to whatever level preferred. The value of severity does not change the messages that are
forwarded to Syslog.
Facility
Specifies what type of application is logging the message. The default is Internal (or Syslog). This is
used to categorize the messages when they are received by the Syslog server.
Testing the Connection
Click Test Connection to test the IP/Domain, Port and Protocol settings. If valid values are entered,
after a couple of moments, a success confirmation displays.
Advanced Threat Prevention Syslog IP Addresses
Syslog server IP addresses to allow, by region:
US (includes my.cylance.com and my-vs2.cylance.com):
52.2.154.63
52.20.244.157
52.71.59.248
52.72.144.44
54.88.241.49
AU (my-au.cylance.com):
52.63.15.218
52.65.4.232
EU (my-vs0-euc1.cylance.com and my-vs1-euc1.cylance.com):
52.28.219.170
52.29.102.181
52.29.213.11
Note: This IP Address should remain static.
For the latest IP addresses for Syslog messages, contact Dell ProSupport.
Management
Commit Policies
Uncommitted policies display in a badge icon in the top left of the Management Console. Click the
badge icon to navigate to Management > Commit.
To commit polices that have been modified and saved:
1. In the left pane, click Management > Commit.
2. In Comment, enter a description of the change.
Best practice: add a comment about the changes that are committed.