Administrator Guide
Table Of Contents
- Encryption Recovery v11.1
- Contents
- Getting Started with Recovery
- Policy-Based or File/Folder Encryption Recovery
- Hardware Crypto Accelerator Recovery
- Self-Encrypting Drive (SED) Recovery
- Full Disk Encryption Recovery
- Full Disk Encryption and Dell Encryption Recovery
- PBA Device Control
- General Purpose Key Recovery
- BitLocker Manager Recovery
- Password Recovery
- Encryption External Media Password Recovery
- Appendix A - Download the Recovery Environment
- Appendix B - Creating Bootable Media
The <machinename_domain.com>.exe file is downloaded.
Perform a Recovery
1. Create bootable media of the recovery environment. For instructions, see Appendix A - Burning the Recovery Environment.
NOTE: Disable SecureBoot before the recovery process. When finished, enable SecureBoot.
2. Boot to that media on a recovery system or on the device with the drive you are attempting to recover.
A WinPE Environment opens.
3. Enter x and press Enter to get to a command prompt.
4. Navigate to the recovery file and launch it.
An Encryption client diagnostic dialog opens and the recovery file is being generated in the background.
48
General Purpose Key Recovery