Administrator Guide
Table Of Contents
- Encryption Recovery v11.1
- Contents
- Getting Started with Recovery
- Policy-Based or File/Folder Encryption Recovery
- Hardware Crypto Accelerator Recovery
- Self-Encrypting Drive (SED) Recovery
- Full Disk Encryption Recovery
- Full Disk Encryption and Dell Encryption Recovery
- PBA Device Control
- General Purpose Key Recovery
- BitLocker Manager Recovery
- Password Recovery
- Encryption External Media Password Recovery
- Appendix A - Download the Recovery Environment
- Appendix B - Creating Bootable Media
Obtain the Recovery File - Locally Managed SED Client
Obtain the recovery file.
The file was generated and is accessible from the backup location you selected when Advanced Authentication was installed on
the computer. The filename is OpalSPkey<systemname>.dat.
Perform a Recovery
1. Using the bootable media created earlier, boot to that media on a recovery system or on the device with the drive you are
attempting to recover. A WinPE environment opens with the recovery application.
NOTE: Disable SecureBoot before the recovery process. When finished, enable SecureBoot.
2. Choose option one and press Enter.
3. Select Browse, locate the recovery file, and then click Open.
Self-Encrypting Drive (SED) Recovery
25