Reference Guide

Security Management Server v10.2.11 AdminHelp
IP/Domain
Specifies the IP address or fully-qualified domain name of the Syslog server that the customer has setup.
Consult with your internal network experts to ensure firewall and domain settings are properly configured.
Port
Specifies the port number on the devices that the Syslog server listens for messages. It must be a number
between 1 and 65535. Typical values are: 512 for UDP, 1235 or 1468 for TCP, and 6514 for Secured TCP
(example: TCP with TLS/SSL enabled).
Severity
Specifies the severity of the messages that should display in the Syslog server. This is subjective, and it may
be set to whatever level preferred. The value of severity does not change the messages that are forwarded to
Syslog.
Facility
Specifies what type of application is logging the message. The default is Internal (or Syslog). This is used to
categorize the messages when they are received by the Syslog server.
Testing the Connection
Click Test Connection to test the IP/Domain, Port and Protocol settings. If valid values are entered, after a
couple of moments, a success confirmation displays.
Advanced Threat Prevention Syslog IP Addresses
Syslog server IP addresses to allow, by region:
US (includes my.cylance.com and my-vs2.cylance.com):
52.2.154.63
52.20.244.157
52.71.59.248
52.72.144.44
54.88.241.49
AU (my-au.cylance.com):
52.63.15.218
52.65.4.232
EU (my-vs0-euc1.cylance.com and my-vs1-euc1.cylance.com):
52.28.219.170
52.29.102.181
52.29.213.11
Note: This IP Address should remain static.
For the latest IP addresses for Syslog messages, contact Dell ProSupport.
Management
105