User guide

Licensed Customer Confidential Installing the Outlook® Extension
Email Continuity Administrator Guide version 6.5 (1st ed.) 77
7 Launch Outlook
®
. The Outlook Extension toolbar displays and the Tools >
Options screen includes a tab for MessageLabs Email Continuity.
To remove the Outlook Extension manually:
1 Exit Outlook, if the application is open.
2 Select Start > Control Panel > Add or Remove Programs.
3 In the Currently installed programs: field, scroll to Email Continuity
Outlook Extension, and click it.
4 Click Remove.
5 In the confirmation dialog box, click Yes.
Installation Using Group Policy
NOTE GPO Administration Experience Required
These instructions presume familiarity with creating and distributing software
using GPO. Not all steps in the process are documented here, as each
organization’s environment is unique, and distribution practices may vary.
The Outlook Extension can be distributed through group policy; this method was
tested, and is supported, under the following conditions and using the following
process.
• The Group Policy Object Editor provides configuration settings at the
Computer and User levels. Outlook Extension packages should be
assigned using the Computer Configuration hierarchy.
• The Group Policy Object Editor does not display full version numbers.
Consequently, MessageLabs recommends using the complete version
number in the package name (for example, Outlook Extension 6-1-0-
8015).
WARNING Use the same method for installation and removal of the Extension
If you install the Outlook Extension through Group Policy, you must remove it
using Group Policy.
To install the Outlook Extension using Group Policy:
1 Create a new GPO package using the Outlook Extension MSI.
2 Open the package in the GPO editor.
3 Expand Computer Configuration.
4 Expand Software Settings.
5 Right-click Software Installation and select New > Package.
6 Browse for the Outlook Extension MSI, select it, and click Open.