User guide

Licensed Customer Confidential Configuring RedirectorManager
Email Continuity Administrator Guide version 6.5 (1st ed.) 57
10 The SyncManager is ready for use. Click the Next arrow to launch the
SyncManager summary screen.
If other synchronizations are available to you, you can run them at this time. After
you have configured the SyncManager, you should set a deletion threshold
percentage so that a fault alert message is sent when the set percentage of users
or distribution lists is exceeded. See "
Sync Notify Settings" on page 149 for more
information.
If you are using several Exchange servers and Email Continuity controllers, you
can configure SyncManager to specify which Exchange servers are synched by
which Email Continuity controller. This is called distributed synchronization.
To configure distributed synchronization with SyncManager:
1 On the server that is your primary controller, open SyncManager. From
the Start menu, select Programs > MessageLabs > SyncManager.
2 Click the Configure button. The Edit Sync Properties window appears.
3 Click the Distributed tab.
4 Use the Add and Remove buttons to move Exchange servers from the
Server List to the Included Servers list. Servers in the Included Servers
list will be synchronized by this controller.
5 Click Save.
6 Repeat this process for the secondary controllers in your configuration.
Configuring RedirectorManager
The RedirectorManager is a centralized console interface through which
administrators install, upgrade, and maintain RedirectorSink objects. In the event
of a partial disruption of the primary mail system, the RedirectorSinks route email
messages destined for affected users to their Email Continuity mailboxes. The