Owners Manual
Next steps
1 Install the expansion card risers.
2 Connect the cables to the expansion card.
3 Follow the procedure listed in After working inside your system.
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which provides the exibility of selecting dierent connectivity
options.
Removing the NDC riser
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Disconnect the cables connected to the Network Daughter Card (NDC) riser.
Steps
1 Slide the riser retention bracket to unlock the NDC riser.
2 Hold the NDC riser by its edges, and pull the NDC riser until the card edge connector disengages from the connector on the system
board.
3 Lift the NDC riser from the system.
Figure 44. Removing the NDC riser
86
Installing and removing system components