Owners Manual

iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can congure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 8. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Condition
Solid green for two seconds Indicates that the laptop or tablet is connected.
Flashing green (on for two
seconds and o for two
seconds)
Indicates that the laptop or tablet connected is recognized.
Turns o Indicates that the laptop or tablet is unplugged.
Back view of the system
You can access the following components from the back of the system:
Figure 6. Back view features
Table 9. Features available on the back of the system
Item Slot, button, or connector Icon Description
1 expansion card riser (right) N/A
The expansion card riser (right) supports up to three full-height PCI
Express expansion cards. For more information, see Expansion card
installation guidelines.
2 expansion card slot N/A
The expansion slots on the system board supports full-height half-length
PCI Express expansion cards.
12 XC940 Series overview