Owners Manual
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Blinks white slowly Indicates that rmware update is in
progress.
If the indicator continues to blink indenitely, see
Getting help.
Blinks white ve times rapidly and
then turns o
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Check if iDRAC Quick Sync 2 feature is congured to
be disabled by iDRAC. If the problem persists, see
Getting help. For more information, see Integrated
Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals.
Solid amber Indicates that the system is in fail-safe
mode.
Restart the system. If the problem persists, see
Getting help.
Blinking amber Indicates that the iDRAC Quick Sync 2
feature is not responding properly.
Restart the system. If the problem persists, see
Getting help.
Right control panel
Figure 5. Right control panel
Table 7. Right control panel
Item Button or port Icon Description
1 Power button
Indicates if the system is turned on or o. Press the power button to
manually turn on or o the system.
NOTE: Press the power button to gracefully shut down an
ACPI-compliant operating system.
2 iDRAC Direct port The iDRAC Direct port is micro USB 2.0-compliant. This port enables
you to access the iDRAC Direct features. For more information, see
the Integrated Dell Remote Access Controller User’s Guide at
Dell.com/idracmanuals.
3 USB ports
The USB ports are 9-pin, USB 3.0-compliant. These ports enable you
to connect USB devices to the system.
4 VGA port
Enables you to connect a display device to the system. For more
information, see Technical specications.
XC940 Series overview 11