Owners Manual

System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 3. System health and system ID indicator
Table 5. System health and system ID indicator codes
System health and system ID indicator code Condition
Solid blue Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Blinking blue Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Solid amber Indicates that the system is in fail-safe mode. If the problem persists,
see Getting help.
Blinking amber Indicates that the system is experiencing a fault. Check the System
Event Log or the LCD panel, if available on the bezel, for specic error
messages.
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 4. iDRAC Quick Sync 2 indicators
Table 6. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
O (default state) Indicates that the iDRAC Quick Sync 2
feature is turned o. Press the iDRAC Quick
Sync 2 button to turn on iDRAC Quick Sync
2.
If the LED fails to turn on, reseat the left control panel
ex cable and check. If the problem persists, see
Getting help.
Solid white Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn o.
If the LED fails to turn o, restart the system. If the
problem persists, see Getting help.
Blinks white rapidly Indicates data transfer activity. If the indicator continues to blink indenitely, see
Getting help.
10 XC940 Series overview