Owners Manual
Removing the hard drive backplane
The procedure to remove the backplane is identical for all backplane congurations.
Prerequisites
CAUTION: To prevent damage to the drives and backplane, remove the hard drives from the system before removing the
backplane.
CAUTION: Note the number of each hard drive and temporarily label them before you remove the hard drive so that you can
replace them in the same location.
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the air shroud.
4 Remove the cooling fan assembly.
5 Remove the backplane cover.
6 Remove all hard drives.
7 Disconnect all the cables from the backplane.
Step
Press the release tabs and lift the backplane to disengage the backplane from the hooks on the system.
Figure 65. Removing the hard drive backplane
Next step
Install the hard drive blank.
Installing the hard drive backplane
The procedure to install the backplane is identical for all backplane congurations.
Prerequisite
Follow the safety guidelines listed in Safety instructions.
NOTE
: The procedure to install the backplane is similar for all backplane congurations.
Installing and removing system components 109