Reference Guide

Dell Nautilus

Dell Nautilus is a general maintenance release utility for updating rmware for SAS and SATA drives (or disks).

About this task

NOTE: For information about the supported Dell Nautilus version number, see

Dell EMC XC6420 Series Hyper-Converged

Appliances Support Matrix

available at Dell.com/XCSeriesmanuals.

Perform the following steps to download the Dell Nautilus Firmware Update Utility for SAS and SATA disk Solid State Drives (SSDs):

Steps

1 Go to Dell.com/support/drivers.

2 In the Customized support section, in the Enter your Service Tag or Express Service Code box, type the Service Tag of your Dell

EMC XC6420, and then click Submit.

NOTE: If you do not have a Service Tag, select Detect My Product to allow the appliance to automatically detect your

Service Tag, or select Choose from a list of all Dell products to select your product from the Product Selection page.

3 On the Product Support page, click Drivers & downloads.

4 From the Operating System drop-down menu, select Not Applicable.

5 Go to the SAS Drive section and search for Dell Nautilus Firmware Utility for SAS and SATA disk and SSDs.

6 Click Download. Click Download again to download the .exe le. In your Download folder, locate the latest version of Dell Nautilus and

click to expand the compressed les.

7 In the extracted folder, run USBMake Utility.

8 Create the bootable Nautilus package and complete one of the following tasks:

• To create a bootable CD or DVD image (ISO), click Create Bootable CD Image and follow instructions. Copy the .iso image le to

CD, or save the bootable ISO on a management workstation.

• Connect a USB ash drive to the appliance and follow instructions to create a bootable USB ash drive.

Downloading and installing software applications