Administrator Guide

64 XC Series Data Protection Management Console Administrator’s Guide | A02
Deploy Avamar vSphere Proxies
7.2 Avamar client configuration in Hyper-V
DPMC can install and configure the EMC Avamar Client and the EMC Avamar Backup Hyper-V VSS Plugin to
an iSCSI target using Acropolis Block Services on each Windows host that exists on a cluster. This option
becomes available once a Hyper-V cluster is discovered by DPMC or during initial setup.
NOTE: If multiple Hyper-V clusters are discovered by DPMC at the same time, you need to perform all steps
in this section for each cluster.
7.2.1 Setting iSCSI Data Services IP address
You need to set the iSCSI Data Services IP address in the Prism web interface to provide target discovery to
clients and simplify external iSCSI configuration on clients with Acropolis Block Services.
1. Access the Prism web page using the Nutanix cluster IP address and log in.