Administrator Guide

30 XC Series Data Protection Management Console Administrator’s Guide | A02
5 Association of Avamar with DPMC Virtual Machine
To associate an Avamar Virtual Edition (AVE) instance with DPMC, you need a web browser to connect to the
DPMC web interface.
The blank frames, displayed above, are intended to be populated with the AVE and Data Domain information.
To allow DPMC to populate these frames, deploy AVE and associate it with DPMC.
1. From the Settings (gear tool) drop-down menu, select Associate with Deployed Avamar VE.
NOTE: Consult the Avamar documentation for the deployment of the AVE VM and associating AVE with Data
Domain.
2. From the pop-up screen, enter the following information:
Field
Description
AVAMAR IP ADDRESS
The IP address of the AVE VM.
AVAMAR ADMIN PASSWORD
The password for the admin user in AVE.
3. Click Finish.
After DPMC successfully connects to AVE, the system populates the frames on the DPMC Home page with
AVE and Data Domain information. All Avamar server information is updated by DPMC and is gathered every
15 minutes.