Administrator Guide

102 XC Series Data Protection Management Console Administrator’s Guide | A02
13 Restoring a VM
In the current DPMC release, DPMC does not offer menu items for restoring VMs. However, you can restore
VMs from the Avamar management console.
In order to restore VMs, launch the Avamar administrator and perform the restore operation. To launch the
Avamar administrator, see the Launch Avamar Administrator
section.
13.1 Example of VM Restore
Avamar Backup & Restore has many options. You can go through the detail of the restore process and apply
as needed. Refer to the Avamar Administrator Guide 7.5.
The following is an example of how to restore an on-demand VM:
1. Launch Avamar Administrator and select Backup & Restore.
2. From the Backup and Restore page, select the Domain and the Clients.