Owners Manual

Figure 33. Installing the front IO board

Next steps

1. Reconnect all cables to the IO board.

NOTE:

Ensure that the cables inside the system are routed along the chassis wall and secured using the cable

securing bracket.

2. Install a cooling fan.

3. Follow the procedure listed in After working inside your system.

4. Install the smart card, if removed.

Common Access Card (CAC) Or Smart Card

Reader

The Smart Card Reader allows for an additional form of authentication for data encryption.

Removing the Smart Card Reader

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedure listed in Before working inside your system.

3. Remove the front IO board.

Steps

1. Using a Phillips #2 screwdriver, remove the screws securing the Smart Card Reader bracket to the chassis.

Installing and removing system components