Owners Manual

Figure 29. Installing the air shroud

2. Holding the touch points, lower the air shroud into the system until it is firmly seated.

When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.

Next steps

Follow the procedure listed in After working inside your system.

Cooling fans

Removing the cooling fan

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedure listed in Before working inside your system.

3. Remove the air shroud.

Steps

Disconnect the cooling fan cable connected to the system board connector and lift the fan out holding the blue touch point.

Installing and removing system components