Owners Manual

Figure 27. Inside the system

Front IO board (VGA, ESATA, M.2, and smart card controller) 2. Cooling fan (one processor configuration- 5 fans, two processor

configuration - 6 fans)

3. Cabling latch 4. Power interposer board

5. Internal MiniPERC riser 6. Low profile expansion riser 2

7. Low profile expansion riser 1 8. Processor blank

9. Heat sink and processor 10. Air shroud

11. Hard drive backplane

Air shroud

Removing the air shroud

Prerequisites

CAUTION:

Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in

shutdown of the system and loss of data.

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedure listed in Before working inside your system.

Steps

Holding the touch points, lift the air shroud away from the system.

Installing and removing system components