Owners Manual

Recommended tools

You need the following tools to perform the removal and installation procedures:

• Key to the bezel lock

The key is required only if your system includes a bezel.

• Phillips #1 screwdriver

• Phillips #2 screwdriver

• Torx #T30 screwdriver

• Torx #T8 screwdriver

• Wrist grounding strap

Optional front bezel

Removing the front bezel

The procedure to remove the front bezel with and without the LCD panel is the same.

Prerequisites

Follow the safety guidelines listed in Safety instructions.

Steps

1. Loosen the thumb screws using a Phillips #2 screwdriver.

2. Pull the bezel away from the system.

Figure 17. Removing the front bezel

Installing the front bezel

The procedure to install the front bezel with and without the LCD panel is the same.

Prerequisites

Follow the safety guidelines listed in Safety instructions.

Installing and removing system components