Owners Manual

4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9. From the Intel TXT option, select On.
Initializing the TPM 2.0 for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On.
4. Save the settings.
5. Restart your system.
6. Enter System Setup again.
7. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
8. Select the TPM Advanced Settings option.
9. From the TPM2 Algorithm Selection option, select SHA256, then go back to System Security Settings screen.
10. On the System Security Settings screen, from the Intel TXT option, select On.
11. Save the settings.
12. Restart your system.
901D rugged kit
The 901D kit provides rugged protection for the XC XR2 server. The 901D kit consists of the components mentioned below:
• Standoff hex spacer screws
• Screws
• Mylar foam
• 901D riser 1
• PCI rugged bracket
• Power supply rugged bracket
• Drive lock bracket
Installing the 901D kit
Prerequisites
Follow the safety guidelines listed in Safety instructions.
1. Removing an expansion card riser.
2. Removing an expansion card riser.
3. Removing the system board.
CAUTION:
You must remove the system board, to install or remove the standoff hex spacer screw.
NOTE: Do not discard the standoff hex nut removed from the system board. It must be reused to secure the 901D
standoff hex spacer.
4. Unpack the 901D kit.
Steps
1. Remove the standoff hex spacer and the hex nut.
124
Installing and removing system components