Owners Manual

iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Integrated Dell Remote Access Controller User's
Guide at www.dell.com/idracmanuals .
Solid amber Indicates that the system is in fail-safe
mode.
Restart the system. If the problem persists, see the
Getting help section.
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Restart the system. If the problem persists, see the
Getting help section.
Right control panel view
Figure 5. Right control panel
Table 6. Right control panel
Item Indicator or button Icon Description
1 Power button
Indicates if the system is turned
on or off. Press the power
button to manually turn on or off
the system.
NOTE: Press the power
button to gracefully shut
down an ACPI-compliant
operating system.
2 USB port
The USB ports are 4-pin, 2.0-
compliant. This port enables you
to connect USB devices to the
system.
3 iDRAC Direct LED N/A The iDRAC Direct LED indicator
lights up to indicate that the
iDRAC Direct port is actively
connected to a device.
4 iDRAC Direct port (Micro-AB
USB)
The iDRAC Direct (Micro-AB
USB) port enables you to access
the iDRAC Direct (Micro-AB)
features. For more information,
see the iDRAC User’s Guide at
www.dell.com/idracmanuals.
Dell EMC XC XR2 overview 11