Owners Manual

Figure 48. Removing the optional IDSDM card

NOTE

: There are two dip switches on the IDSDM card for write-protection.

Next step

Install the optional IDSDM card.

Installing the optional IDSDM

Prerequisite

Follow the safety guidelines listed in Safety instructions.

Steps

1 Locate the IDSDM connector on the system board.

To locate IDSDM connector, see System board jumpers and connectors.

2 Align the IDSDM card with the connector on the system board.

3 Push the IDSDM card until it is rmly seated on the system board.

Installing and removing system components