Owners Manual
4 Slide the PCIe retention bracket down to hold the card in place.
NOTE: This step is applicable only if you are installing the expansion cards in the slots 12 and 13 of Riser 3 (IO_RISER3) and
slots 9 and 10 of Riser 2(IO_RISER2).
5 Close the PCIe card latch.
Figure 43. Installing the expansion card into expansion card riser
Next steps
1 Install the expansion card risers.
2 Connect the cables to the expansion card.
3 Follow the procedure listed in After working inside your system.
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which provides the exibility of selecting dierent connectivity
options.
Removing the NDC riser
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Disconnect the cables connected to the Network Daughter Card (NDC) riser.
92
Installing and removing system components