Owners Manual

Next step

Install the expansion card riser.

Installing the expansion card riser

Prerequisite

Follow the safety guidelines listed in Safety instructions.

Steps

1 Align the guide rail on the side of the riser with the slot on the side of the chassis and lower the riser into the system.

2 Lower the release lever until the connector on the riser connects with the connector on the processor expansion module (PEM).

CAUTION: To avoid damage to the connectors on the PEM, you must only use the release levers to seat the expansion card

risers rmly on the PEM.

Figure 40. Installing expansion card riser (right)

Installing and removing system components