Owners Manual

Figure 33. Installing a drive into the drive carrier
Hard drive backplane
NOTE
: NVMe drive slots are 20, 21, 22, and 23.
Drive slot numbering is 0 relative for chassis. All NVMe drives are installed in the last slots. Maximum of four NVMe drives are supported.
Your system supports 2.5 inch (x24) SAS/SATA backplane.
Figure 34. XC940-24
The settings for XC940-24 are listed here:
Table 37. Settings for XC940-24
Name State Slot Number Size Security Status Bus Protocol Media Type
PCle SSD in Slot
20 in Bay 1
Ready 20 1490.42 GB Not Applicable PCle SSD
PCle SSD in Slot
21 in Bay 1
Ready 21 1490.42 GB Not Applicable PCle SSD
Installing and removing system components 77