Owners Manual

Interfaces Document/Section

iDRAC Direct and

Quick Sync 2

(optional)

See Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals

NOTE: To access iDRAC, ensure that you connect the Ethernet cable to the iDRAC direct port. You can also access iDRAC

through the shared LOM mode, if you have opted for a system that has the shared LOM mode enabled.

You can log in to iDRAC as:

• iDRAC user

• Microsoft Active Directory user

• Lightweight Directory Access Protocol (LDAP) user

NOTE: You must have the iDRAC credentials to log in to iDRAC.

NOTE: Ensure that you change the default user name and password after setting up the iDRAC IP address.

For more information about logging in to the iDRAC and iDRAC licenses, see the latest Integrated Dell Remote Access Controller User's

Guide at Dell.com/idracmanuals.

You can also access iDRAC by using RACADM. For more information, see the RACADM Command Line Interface Reference Guide at

Dell.com/idracmanuals.

Methods to download rmware and drivers

You can download the rmware and drivers by using any of the following methods:

Table 34. Firmware and drivers

Methods Location

From the Dell Support site Dell.com/support/home

Using Dell Remote Access Controller Lifecycle Controller (iDRAC

with LC)

Dell.com/idracmanuals

Downloading drivers and rmware

Dell EMC recommends that you download and install the latest BIOS, drivers, and systems management rmware on your system.

Prerequisite

Ensure that you clear the web browser cache before downloading the drivers and rmware.

Steps

1 Go to Dell.com/support/drivers.

2 In the Drivers & Downloads section, type the Service Tag of your system in the Enter a Service Tag or product ID box, and then click

Submit.

NOTE

: If you do not have the Service Tag, select Detect Product to allow the system to automatically detect your Service

Tag, or click View products, and navigate to your product.

3 Click Drivers & Downloads.

The drivers that are applicable to your selection are displayed.

Initial system setup and conguration