Owners Manual
Remote management port specications
The XC940 Series system supports one dedicated 1Gbe Ethernet port with optional card and up to two optional shared NIC ports.
Drive specications
Hard drives
The XC940 Series system supports up to twenty four 2.5-inch, internal, hot swappable SAS or SATA SSDs/hard drives.
Ports and connectors specications
USB ports
The XC940 Series system supports:
• Two USB 3.0-compliant ports on the front panel
• Two USB 3.0-compliant ports on the back panel
• One USB 3.0-compliant internal port
NIC ports
The XC940 Series system supports up to four NDC ports on the back panel, which are available in the following congurations:
• Four RJ-45 ports that support 10, 100, and 1000 Mbps
• Four RJ-45 ports that support 100 M, 1 G and 10 Gbps
• Four RJ-45 ports, where two ports support maximum of 10 G and the other two ports maximum of 1 G
• Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps
• Four SFP+ ports that support up to 10 Gbps
• Two SFP28 ports that support up to 25 Gbps
Serial port
The XC940 Series system supports one serial port on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-
compliant.
VGA ports
The XC940 Series system supports two 15-pin VGA ports. One of the VGA ports is located on the front of the system and the other port is
on the back of the system.
24
Technical specications