Owners Manual

Right control panel
Figure 5. Right control panel
Table 7. Right control panel
Item Button or port Icon Description
1 Power button
Indicates if the system is turned on or o. Press the power button to
manually turn on or o the system.
NOTE: Press the power button to gracefully shut down an
ACPI-compliant operating system.
2 iDRAC Direct port The iDRAC Direct port is micro USB 2.0-compliant. This port enables
you to access the iDRAC Direct features. For more information, see
the Integrated Dell Remote Access Controller User’s Guide at
Dell.com/idracmanuals.
3 USB ports
The USB ports are 9-pin, USB 3.0-compliant. These ports enable you
to connect USB devices to the system.
4 VGA port
Enables you to connect a display device to the system. For more
information, see Technical specications.
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can congure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
12
Dell EMC XC940 XC Series Appliance and XC Core System overview