Support Matrix

10 Dell EMC XC940 XC Series Appliance and XC Core System Support Matrix | A18
1.3 Supported networking
This section provides information about networking supported by your hardware and supported NICs.
Intel branded Network Daughter Cards (NDC) and Network Interface Cards (NIC) specify the use of only Intel
branded SFP+ optical modules for use with optical cables. When ordering a system with optics, the
appropriate Intel branded SFP+ optical modules are included with your order. If you already have SFP+
optical modules, ensure they are the Intel branded modules before inserting into the NDC or NIC. Twinax
cables are also the supported network cables for Intel NDC and NIC.
CAUTION: Using any brand of SFP+ module other than Intel during deployment disables the 10 GbE ports.
Call Dell EMC Support to recover port functionality.
WARNING: Hot-plugging an unsupported SFP+ module causes ESXi host to fail with purple diagnostic
screen. Call Dell EMC Support to recover from this situation.
1.4 Supported NICs and NDCs
This sections specified the supported NICs and NDCs.
NOTE: Mellanox supported with AOS 5.6.1 and later. Broadcom supported with AOS 5.16 and later.
Broadcom is not supported under Hyper-V.