Support Matrix

9 Dell EMC XC940 XC Series Appliance and XC Core System Support Matrix | A17
Form Factor
Capacity
Type
Vendor
2.5”
2.4 TB
SAS SED HDD
Dell EMC Supported
2.5"
400 GB
SAS SSD
Dell EMC Supported
2.5"
480 GB
SATA SSD
Dell EMC Supported
2.5"
480 GB
SAS SSD
Dell EMC Supported
2.5"
800 GB
SAS SSD
Dell EMC Supported
2.5"
960 GB
SAS SSD
Dell EMC Supported
2.5"
960 GB
SATA SSD
Dell EMC Supported
2.5"
1600 GB
SAS SSD
Dell EMC Supported
2.5"
1920 GB
SAS SSD
Dell EMC Supported
2.5"
1920 GB
SAS SED SSD
Dell EMC Supported
2.5"
1920 GB
SATA SSD
Dell EMC Supported
2.5"
3200 GB
SAS SSD
Dell EMC Supported
2.5"
3840 GB
SATA SSD
Dell EMC Supported
2.5"
3840 GB
SAS SSD
Dell EMC Supported
2.5"
6400 GB
SAS SSD
Dell EMC Supported
2.5"
7680 GB
SAS SED
Dell EMC Supported
2.5”
7680 GB
NVMe
*Available on Core only
Dell EMC Supported
1.2.1 Encryption Restrictions
This section describes encryption restrictions.
• If encryption has never been enabled and you do not plan to use it in the future, secure encrypted
drives (SED) can be mixed with unencrypted (non-SED) drives in the same node.
• If encryption was never enabled and remains disabled, encrypted nodes can be mixed with
unencrypted nodes in the same cluster.
• Encryption is not supported for NVMe drives.
• All nodes in the cluster must have SED capable drives to use hardware SED encryption.
If SED drives are mixed with non-SED drives, the encryption cannot be enabled for that cluster.
NOTE: An encryption key must be removed from the SED drives from Prism before you format (clear) the
SED drives.
1.3 Supported networking
This section provides information about networking supported by your hardware and supported NICs.
Intel branded Network Daughter Cards (NDC) and Network Interface Cards (NIC) specify the use of only Intel
branded SFP+ optical modules for use with optical cables. When ordering a system with optics, the
appropriate Intel branded SFP+ optical modules are included with your order. If you already have SFP+