Service Manual

Figure 48. Installing the bay intrusion switch
Next steps
1. Install the drive bay 1 bracket.
2. Close the drive bays.
3. If removed, install the front bezel.
4. Follow the procedure listed in After working inside your system.
Drive backplane
Drive backplane guidelines
Depending on your system configuration, the drive backplanes supported in XC740xd2 are listed here:
Table 3. Supported backplane options for XC740xd2 system
System Supported backplane options
XC740xd2 3.5-inch (x12) SAS/SATA/SSD backplane (front)
NOTE: The backplane for both drive bay 1 and bay 2 is identical.
Installing and removing system components 67