Service Manual

Figure 14. Removing the front bezel

Next steps

Replace the front bezel.

Installing the front bezel

Prerequisites

1. Follow the safety guidelines listed in Safety Instructions.

2. Locate and remove the bezel key.

NOTE:

The bezel key is part of the front bezel package.

Steps

1. Align and insert the tabs on the right end of the bezel into the slots on the system.

NOTE:

Ensure that the drive bay is locked before installing the front bezel, for more information see closing the drive

bays section.

2. Fit the left end of the bezel onto the system and press the bezel until you hear the release button click.

3. Lock the bezel.

Installing and removing system components