Users Guide

NOTE: Lifecycle Controller allows 256 characters in a path that includes the file name and file extension. For example, if 56

characters are used for file name and extension, only 200 characters can be used for the path. Lifecycle Controller does not

support these characters -:, *,?,”,<,>,|,#,%,^, and SPACE.

HTTP and HTTPS

For HTTP/HTTPS, type the following details:

● Share Name/Address—Type the IP address of the local HTTP/HTTPS server. Examples: \\192.168.0.120\ or IP address

● File Path—Type the subdirectories path, if any.

NOTE: Lifecycle Controller allows 256 characters in a path that includes the filename and file extension. For example, if 56

characters are used for filename and extension, only 200 characters can be used for the path. Lifecycle Controller does not

support these characters -:, *,?,”,<,>,|,#,%, ^, and SPACE.

Adding a work note to the Lifecycle Log

You can add a work note to the Lifecycle Log to record comments for your reference. You can enter comments such as

scheduled downtime or changes made by administrators who work in different shifts for later reference.

NOTE: You can type a maximum of 50 characters in the Lifecycle Log field. The special characters such as <, >, &, and %

are not supported.

To add a work note:

1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.

2. In the left pane, click Lifecycle Log.

3. In the right pane, click Add a work note to Lifecycle Log.

4. In the Enter a work note field, enter the comments and click OK.

Monitor