Owners Manual
System Setup details
The System Setup Main Menu screen details are explained as follows:
NOTE: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.
Option Description
System BIOS Enables you to congure BIOS settings.
iDRAC Settings Enables you to congure the iDRAC settings.
The iDRAC settings utility is an interface to set up and congure the iDRAC parameters . You can enable or disable
various iDRAC parameters by using the iDRAC settings utility. For more information about this utility, see Integrated
Dell Remote Access Controller User’s Guide at Dell.com/idracmanuals.
Device Settings Enables you to congure device settings.
System BIOS
You can use the System BIOS screen to edit specic functions such as boot order, system password, setup password, and set the SATA
enable or disable USB ports.
NOTE
: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE
: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
NOTE
: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.
The System BIOS Settings screen details are explained as follows:
Option
Description
System Information Species information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Species information and options related to the installed memory.
Processor Settings Species information and options related to the processor such as speed and cache size.
SATA Settings Species options to enable or disable the integrated SATA controller and ports.
36 Pre-operating system management applications