Owners Manual

Figure 77. Removing right control panel
Next step
Install the right control panel.
Installing the right control panel
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Route the control panel cable and VGA cable through the side wall of the system.
2 Align the control panel with the control panel slot on the system and attach the control panel to the system .
3 Connect the VGA cable to the system board.
4 Connect the control panel cable to the system board and secure it using cable latch.
5 Using Phillips #1 screwdriver, install the screw that secures the control panel and cable tube to the system.
Installing and removing system components
127