Owners Manual

Table 5. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
O (default state) Indicates that the iDRAC Quick Sync 2
feature is turned o. Press the iDRAC Quick
Sync 2 button to turn on the iDRAC Quick
Sync 2 feature.
If the LED fails to turn on, reseat the left control panel
ex cable and check again. If the problem persists,
see Getting help.
Solid white Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn o.
If the LED fails to turn o, restart the system. If the
problem persists, see Getting help.
Blinks white rapidly Indicates data transfer activity. If the indicator continues to blink indenitely, see
Getting help.
Blinks white slowly Indicates that rmware update is in
progress.
If the indicator continues to blink indenitely, see
Getting help.
Blinks white ve times rapidly and
then turns o
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Check if iDRAC Quick Sync 2 feature is congured to
be disabled by iDRAC. If the problem persists, see
Getting help. For more information, see Integrated
Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals or Dell OpenManage Server
Administrator User’s Guide at Dell.com/
openmanagemanuals.
Solid amber Indicates that the system is in fail-safe
mode.
Restart the system. If the problem persists, see
Getting help.
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Restart the system. If the problem persists, see
Getting help.
Right control panel view
Figure 6. Right control panel view
12
Overview