Owners Manual

Figure 39. Removing system battery

Next step

Install the system battery.

Installing the system battery

Prerequisites

WARNING

: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or

equivalent type recommended by the manufacturer. For more information, see the safety information that shipped with your

system.

NOTE: Battery is a Field Replaceable Unit (FRU). Removal and installation procedures are to be performed only by Dell certied

service technicians.

1 Follow the safety guidelines listed in Safety instructions.

2 Follow the procedure listed in Before working inside your system.

Steps

1 Locate the battery socket. For more information, see System board connectors.

2 Hold the battery with the "+" facing up and slide it under the securing tabs.

3 Press the battery into the connector until it snaps into place.

Installing and removing system components