Owners Manual

Wrist grounding strap
ESD mat
Inside the sled
CAUTION: This system must be operated with the system cover installed to ensure proper cooling.
Figure 9. Inside the XC6420 sled
1
sled pull handle 2 mezzanine card
3 SATA connector 4 memory slot (4)
5 CPU1 processor heat sink module 6 CPU2 processor heat sink module socket
7 supporting bracket 8 M.2 SATA riser
9 memory slot (4) 10 PCIe expansion card riser assembly
XC6420 Series sled
The XC6420 Series sled is a system unit that is installed into the XC6400 Series enclosure. The sled features dual processors, memory, a
PCIe expansion slot, mezzanine cards, and onboard storage (SD card and M.2 SATA).
Removing a sled
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
NOTE
: The process of removing a sled blank is similar to removing a sled.
Step
Press the retaining latch and using the handle slide the sled out of the enclosure horizontally, ensuring that the sled is supported from
beneath.
50
Installing and removing system components