Owners Manual

Option Description

Capacity Species the total capacity of the hard drive. This eld is undened for removable media

devices such as optical drives.

Port H Sets the drive type of the selected device. For the Embedded SATA settings in ATA mode, set this eld to Auto to

enable BIOS support. Set it to OFF to turn o BIOS support.

For AHCI or RAID mode, BIOS support is always enabled.

Option Description

Model Species the drive model of the selected device.

Drive Type Species the type of drive attached to the SATA port.

Capacity Species the total capacity of the hard drive. This eld is undened for removable media

devices such as optical drives.

NVMe Settings

NOTE: The XC Series Appliance and XC Core System does not support the NVMe drives with RAID.

NOTE: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.

The NVMe settings enable you to set the NVMe drives to either RAID mode or Non-RAID mode.

NOTE

: To congure these drives as RAID drives, you must set the NVMe drives and the Embedded SATA option in the SATA

Settings menu to RAID mode. If not, you must set this eld to Non-RAID mode.

Viewing NVMe Settings

To view the NVMe Settings screen, perform the following steps:

1 Turn on, or restart your system.

2 Press F2 immediately after you see the following message:

F2 = System Setup

NOTE

: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart

your system and try again.

3 On the System Setup Main Menu screen, click System BIOS.

4 On the System BIOS screen, click NVMe Settings.

NVMe Settings details

NOTE

: The XC Series Appliance and XC Core System does not support the NVMe drives with RAID.

NOTE: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.

The NVMe Settings screen details are explained as follows:

Option

Description

NVMe Mode Enables you to set the NVMe mode. This option is set to Non RAID by default.

Pre-operating system management applications 35