Owners Manual

Table 3. Ethernet port indicator codes
Convention Status Condition
A Link and activity indicators are o The NIC is not connected to the network.
B Link indicator is green The NIC is connected to a valid network at its
maximum port speed.
C Link indicator is amber The NIC is connected to a valid network at less than
its maximum port speed.
D Activity indicator is ashing green Network data is being sent or received.
Sled to hard drive mapping
NOTE: Drive slot numbering is zero relative for chassis. All NVMe drives are installed in the last slots.
Two NVMe drives are supported in each sled with slot 0 and 1 for each sled.
Figure 5. Sled to drive mapping for the enclosure with 24 x 2.5 inch drives
1
Drives 0–5 mapped to sled 1 2 Drives 6–11 mapped to sled 2
3 Drives 12–17 mapped to sled 3 4 Drives 18–23 mapped to sled 4
5 (optional) NVMe hard drive location
NOTE: The warranties of the drives are linked to the Service Tag of the corresponding sled.
Figure 6. XC6420
The settings for XC6420 are listed here:
10
XC6420 Series XC Core System overview