Reference Guide

Technical support and resources
8 Dell EMC XC Series Appliance and XC Core System Remote Direct Memory Access Deployment Guide
4. Enable RDMA on the cluster.
5. Click Configure rdma0 interface.
6. Input values as appropriate:
• IP: xxx.xx.x.x (for example:172.16.0.0)
NOTE: Do not use 192.168.5.0
• Netmask: xxx.xx.xxx.x (for example: 255.255.252.0)
• Vlan: xx (Vlan = 100)
• PFC: 0 – 7 (for example 3 or 4)
7. Click to verify.
Successful RDMA configuration displays as Disable – meaning its enabled as shown below.