Users Guide
Table 3. Cong le options usage
Element Options Usage Description
Repository
Type="OSNATIVE|REPOSITORY"
When type is OSNATIVE, the command specic to
the OS will be used to install updates. Updates are
fetched from IP + '/' + Directory.
When type is REPOSITORY, the updates will be
downloaded from location provided in the
IP + '/'
+ Directory.
Repository -> RepoLocation
IP="<ipaddress>"
Directory="<directoryaddres
s>"
The attributes provides the location of repository for
the update of IP and Directory as: [IP + '/' +
Directory]. If the Type is OSNATIVE, location
provided in the [IP + '/' + Directory] is expected to
carry updates in rpm format. If the Type is
REPOSITORY, location provided by the [IP + '/' +
Directory] should contain catalog le in .gz format and
same will be used to fetch updates.
UseLatestDSU="True|False"
The UseLatestDSU refers to the latest DSU version
to be installed at the target system.
Usecase 1: Bootable ISO
a. TRUE: When Type is OSNATIVE, DSU'S version is
compared from the location provided in the IP +
'/' + Directory to the version carried by DSU
bootable plug-in.
b. False: The DSU version carried inside dell boot
plugin will be used.
UseCase2: While using remote option.
a. TRUE: Latest DSU will be made available at target
system (Install/update)
b. False: DSU version available at target system will
be used to apply updates.
This options is ignored in case Type is REPOSITORY.
NOTE: Dell recommends the value of the
attribute as True, when using the remote
option.
NOTE: Dell recommends the value of the
attribute as True, in the cong le to avoid
failures at the remote system.
ApplySequence -> Sequence
Type= "ApplyFirst |
ApplyLast"
This option allows user to provide the sequencing.
ApplyFirst allows the user to apply the list of
categories mentioned to be updated rst and
ApplyLast allows the user to apply the updates last.
ApplySequence -> Sequence ->
Category
Value OrderID
There are two attributes which has to be mentioned
for this feature:
Sample options usage 21