Users Guide

The DSU commands are not working even after the
successful installation of the software.
After successful installation of DSU, if the commands do not work, ensure to assess the following requirements:
• Check if the environment variables are set
• Check if you have administrator privileges if DSU is installed on the supported Windows operating system
• Check if you have root permission if DSU is installed on the supported linux operating system
Failure message is observed while creating a bootable
ISO through DSU.
[FAILED] Failed to start Startup script for DTK
Please check 'systemctl status start-script.service' for details”
The message displayed can be ignored as it will not have any impact while creating a bootable ISO.
If an ISO created with DSU on iDRAC virtual media, an
error message is displayed.
When a Bootable ISO created with DSU is mounted on iDRAC virtual media, possibility of the media getting un-mounted abruptly when
iDRAC update option is selected. Due to which other updates available on the ISO will not continue and an error message is displayed as
“le not found”. Work around in such cases, is suggested not to include iDRAC update along with other system updates while creating
bootable ISO.
22
Troubleshooting DSU